100
IRUS Total
Downloads

Additive manufacturing for solid oxide cell electrode fabrication

File Description SizeFormat 
Paper_54279_manuscript_14296_0 Marina.pdfAccepted version1.19 MBAdobe PDFView/Open
Title: Additive manufacturing for solid oxide cell electrode fabrication
Authors: Lomberg, M
Boldrin, P
Tariq, F
Offer, G
Wu, B
Brandon, NP
Item Type: Conference Paper
Abstract: © The Electrochemical Society.Additive manufacturing can potentially offer a highly-defined electrode microstructure, as well as fast and reproducible electrode fabrication. Selective laser sintering is an additive manufacturing technique in which three-dimensional structures are created by bonding subsequent layers of powder using a laser. Although selective laser sintering can be applied to a wide range of materials, including metals and ceramics, the scientific and technical aspects of the manufacturing parameters and their impact on microstructural evolution during the process are not well understood. In the present study, a novel approach for electrode fabrication using selective laser sintering was evaluated by conducting a proof of concept study. A Ni-patterned fuel electrode was laser sintered on an yttria-stabilized zirconia substrate. The optimization process of laser parameters (laser sintering rate and laser power) and the electrochemical results of a full cell with a laser sintered electrode are presented. The challenges and prospects of using selective laser sintering for solid oxide cell fabrication are discussed.
Issue Date: 29-Jul-2015
Date of Acceptance: 26-Jul-2015
URI: http://hdl.handle.net/10044/1/26689
DOI: https://dx.doi.org/10.1149/06801.2119ecst
ISBN: 9781607685395
ISSN: 1938-6737
Publisher: Electrochemical Society
Start Page: 2119
End Page: 2127
Journal / Book Title: ECS Transactions
Volume: 68
Issue: 1
Copyright Statement: © 2015 ECS - The Electrochemical Society
Conference Name: ECS Conference on Electrochemical Energy Conversion & Storage with SOFC-XIV
Publication Status: Published
Start Date: 2015-07-26
Finish Date: 2015-07-31
Conference Place: Glasgow, Scotland
Appears in Collections:Faculty of Engineering
Earth Science and Engineering
Grantham Institute for Climate Change